Two applicators in protective suits spraying BAS Flexcoat across an industrial floor, the fresh membrane still wet under the hall lights.

BAS Flexcoat. Flexible, strong, waterproof.

  • WALKABLE 60 S
  • SHORE 65D
  • 380% ELONGATION

A flexible, hard-wearing coating solution. Spray-on technology creates a seamless, jointless, elastic and anti-slip surface. Walkable after 60 seconds. Full load after 72 hours.

Seamless, jointless waterproof membrane. Spray-on, forms one continuous membrane. No joints to fail, no seams to seal.

Extremely resistant to scratches and impact. Shore hardness 65D. Resistant to many chemicals, works in demanding environments.

Walkable after 60 seconds. Full load after 72 hours. Extremely fast cure means minimal downtime compared to traditional epoxy.

Mobile solution, all in one trailer. No power, water or air hookup needed. Free of VOC and solvents.

A flat industrial roof coated in pale BAS Flexcoat, with rooftop units and a line of trees beyond.
SURFACE:BAS FLEXCOAT APPLICATION:SPRAY-ON HARDNESS:SHORE 65D ORIGIN:DENMARK

Where it goes

Trailer ramps, pools, industrial walls, industrial floors, truck and trailer cargo beds. One continuous membrane, sprayed on site.

A seamless, jointless waterproof membrane with an anti-slip surface. Approved for use with food and drinking water. Resistant to many chemicals.

WATERPROOF
EN 1062-3:2008
ANTI-SLIP
EN 13036-4:2011
FOOD CONTACT
NSF/ANSI/CAN 61
CHEMICAL
EN 13529:2005
Find an applicator
Sunlight moving across the water of a pool with a pale coated edge.

Walkable after 60 seconds. Full load after 72 hours. Extremely resistant to scratches and impact. Anti-slip texture can be varied to spec.

CURE
WALKABLE 60 S. FULL LOAD 72 H
ABRASION
EN ISO 5470-1:2001
IMPACT
EN ISO 6272-1:2011
HARDNESS
SHORE 65D
Find an applicator
A grey speckled BAS Flexcoat floor in a workshop, with a quad bike and a spray rig parked on it.

380% elongation. Resists bubbles, cracks and similar. Spray-on, forms one continuous membrane across floor, wall and every junction between them.

THERMAL
EN 13687-1:2008, EN 13687-2:2002
ADHESION
EN 1542:2000
VAPOUR
EN ISO 7783:2012
CO₂
EN 1062-6:2003
Find an applicator
A spray gun laying BAS Flexcoat onto a wall, the wet membrane fanning out from the nozzle.

Trailer ramps, truck and trailer cargo beds. Elastic, anti-slip, extremely resistant to scratches and impact. Mobile solution, all in one trailer.

SURFACE
EN ISO 5470-1:2017
IMPACT
EN ISO 6272-1:2011
ANTI-SLIP
TEXTURE VARIED TO SPEC
ON SITE
NO POWER, WATER OR AIR HOOKUP
Find an applicator
The coated bed of a trailer, dark grey with a fine anti-slip texture, under a fifth-wheel hitch.

The coating

Shore hardness 65D. 380% elongation. Free of VOC and solvents. Approved for use with food and drinking water.

Two drops of water standing on the textured surface of a cured BAS Flexcoat membrane.
  1. Membrane
  2. Waterproof
  3. Texture

Membrane

Spray-on, forms one continuous membrane. 380% elongation. Resists bubbles, cracks and similar. Free of VOC and solvents.

Waterproof

Seamless, jointless waterproof membrane. Resistant to many chemicals, works in demanding environments. Approved for use with food and drinking water.

Texture

Anti-slip surface. Texture can be varied to spec. Extremely resistant to scratches and impact. Shore hardness 65D.

Technical data

Walkable after 60 seconds. Full load after 72 hours. Free of VOC and solvents.

PROPERTIES

WaterproofSeamless, jointless waterproof membrane
Surface strengthExtremely resistant to scratches and impact
Chemical resistanceResistant to many chemicals, works in demanding environments
ApplicationSpray-on, forms one continuous membrane
Thermal380% elongation. Resists bubbles, cracks and similar
Cure timeWalkable after 60 seconds. Full load after 72 hours
Anti-slipAnti-slip surface. Texture can be varied to spec
Food safeApproved for use with food and drinking water
EnvironmentFree of VOC and solvents
HardnessShore 65D
MobilityMobile solution, all in one trailer. No power, water or air hookup needed
Standard coloursCharcoal / dark grey, light blue, off-white / light grey, sand

TECHNICAL STANDARDS

WaterproofEN 1062-3:2008
SurfaceEN ISO 5470-1:2017
Food contactNSF/ANSI/CAN 61
Anti-slipEN 13036-4:2011
ThermalEN 13687-1:2008, EN 13687-2:2002
ChemicalEN 13529:2005
AbrasionEN ISO 5470-1:2001
AdhesionEN 1542:2000
ImpactEN ISO 6272-1:2011
Capillary absorption and permeabilityEN 1062-3:2008
Vapour permeabilityEN ISO 7783:2012
CO₂ permeabilityEN 1062-6:2003
Certification marksNSF, PZH, ITB, TÜV Rheinland

Colours and textures vary with light and weather. On-screen reproduction may differ from the delivered product.

5 S PER TICK WALKABLE AFTER 60 SECONDS. FULL LOAD AFTER 72 HOURS

Reference project

MOWI, Faroe Islands. A project in a demanding environment.

Two applicators walking the spray hose across a wide hall floor at MOWI, the fresh BAS Flexcoat membrane wet behind them.
The cured BAS Flexcoat floor at MOWI meeting a step and a wall, one continuous membrane across both.
PROJECT:MOWI LOCATION:FAROE ISLANDS SURFACE:BAS FLEXCOAT APPLICATOR:FLÍSAMÚRARIN

Authorised applicators

Flexcoat is sprayed on site by authorised applicators. Call the one nearest your project.

Documents

Data sheets, safety data and approvals for BAS Flexcoat.

Technical data sheetPDF
Safety data sheet (MSDS)PDF
Installation guidePDF
Certifications and approvalsPDF

Start a project

Tell us about the surface. We route it to the right applicator.

By sending this enquiry you accept our privacy policy.